SEARCH

This time, Yeqin installed a 6.2km long belt conveyor with horizontal turning. The total length of the conveying system is 6198.38m, the total head is more than - 24m, and the average conveying capacity is 1800t / h. After the conveyor is installed and put into use, the overall situation is good, and there are occasional temporary faults with little impact. After strengthening the management, the failure rate is very low.

Iron and steel enterprises are generally composed of multiple processes, i.e. multiple branch plants. From ironmaking, coking, power to steelmaking and rolling, there are no less than 100 kinds of raw materials involved. Generally speaking, iron ore is the most important raw materials, followed by various alloy ores, lime and other auxiliary materials, and then coal, carbon, electricity, oxygen, nitrogen, argon and other power media. The conveyor is in steel The application of the industry is ve

The machine is a general purpose continuous conveying equipment for bulk materials, but the conveyor belt with corrugated flange and diaphragm is adopted. Therefore, it is especially suitable for large angle transportation. In the range of working environment temperature from - 15 ℃ to + 40 ℃, various bulk materials with bulk specific gravity of 0.5-2.5t/m3 are transported. 1. It can transport bulk materials with large inclination angle, which can greatly save the floor area of equipment, and

The horizontal length of the conveying system is 1800m and the bandwidth is 1000mm. Conveyor plane conveying, belt model st1600, high temperature resistant rubber belt, head double drum three drive, driving power PD = 250KW

The installation project is located in Jilin Province, with a total contract value of 150 million yuan. The system is 9km long and consists of three tubular belt conveyors. After the system is completed and put into operation, it will become one of the tubular belt conveyor systems with super large comprehensive pipe diameter, transportation capacity and power.

The steel wire core belt conveyor with 1652m horizontal length and 401.4m lifting height is used to transport iron ore to the ground from inclined shaft (inclination angle of 14 °) in deep mining engineering of the mine. The belt width of the conveyor is 1200mm and the conveying capacity is 1000t / h. The conveyor is equipped with functions of double speed operation, controllable start-up transmission CST drive, probe head hydraulic disc brake, inverted belt capture, double backstop, dynamic co

The system is a 5.7 km long multi machine combined conveying system with a bandwidth of 1200mm and a conveying capacity of 1800t / h. The system uses arch truss, non aisle rack system, battery self-service vehicle and other technologies.